Stabilisers

The Breckland Driver QR - the original quick release stabiliser allows you to tow with confidence. Not the cheapest stabiliser on the market but probably the best value for money.

The Bulldog 100Q Stabiliser gives all the security and peace of mind of the more expensive Bulldog stabilisers but at a budget price. It comes with quick release for ease of fitting and a clamp on 'L' Bracket to avoid drilling the caravan chassis. Gold finish only
Link to Manufacturers Website

Bulldog 200Q Stabiliser gold finish comes with easy to use quick release mechanism. It is ideally suited to flange ball towbars but with the option of a clamp on car plate for swan neck towbars (not included as standard). It can be fitted on either the left or the right and can accomodate most socket mounting plate configurations
Link to Manufacturers Website

Bulldog 400Q Twin Stabiliser is particularly suitable for large caravans and high sided or heavy trailers where a single stabiliser might be ineffective. It comes with a double car plate and two 'L' brackets.
Link to Manufacturers Website

Quick release stabiliser with all the features of a quality product at a lower price. Includes fast fit 'L' bracket that clamps onto the chassis eliminating need for drilling.
Designed as a towing aid to control Vehicle Sway and Pitch.
Perfect for Caravans and Trailers within both the Leisure and Commercial Vehicle sector.
2 Year Mechanical parts Warranty and Insurance Approved
Interchangeable friction pads.
Supplied with a free Heavy Duty Canvas Carry Bag

Link to Manufacturers Website

The AKS 1300 stabiliser has been developed for caravans and trailers up to maximum gross weight of 1360kg. It improves stability by up to 30%, provides safety and a more comfortable ride. The friction pads have been tested and exceeded a 50,000 km lifespan. Galvanised and corrosion resistant with an added feature of a towball and coupling mechanism wear indicator. Fits both flange and swanneck style towbars. Not suitable for
replacement of couplings with 360 degree rotation or BPW with gas strut handbrake.
A special triple pack consisting of the AKS 1300 stabiliser together with a security lock and safety ball. Save over £35.00 on individual products..

This stabiliser has maximum capacity of 3000kg.Has all the features of the AKS 1300 though slightly different in style.Replaces the AKS 2004.This pack comprises of the AKS 3004 stabiliser, locking security device and Alko safety ball

Four hole car plate to suit towbars where the towball is attached with two 16mm bolts.Suitable for Scott, Mowbray & Driver Stabilisers.Comes with toggle screw.

As 4 hole plate above but with two holes.Particularly suitable for vehicles with low number plates.

Car plate for Bulldog 200Q Stabiliser to suit standard towbar with towball mounted by two 16mm bolts.

Car plate for Bulldog 100Q stabiliser to suit towbar with towball mounted by two 16mm bolts.

Car plate for 200Q Stabiliser for swanneck style towbars

Car plate to suit swanneck towbars for Scott, Mowbray & Corgi/Driver stabilisers

Twin car plate for Bulldog 400Q Stabiliser

L bracket for caravan end of stabiliser. This bracket has 10 degree crank so leaf spring always sits fully into the slipper shoe.
Suits Breckland Driver, Mowbray & Scott stabilisers but should suit most leaf spring style stabilisers with 50mm wide arm.

Fits all Alko 40/45mm, BPW and ALBE chassis and allows L bracket to be fitted without need to drill. Comes with two studs to fix Standard L Bracket above.

L Bracket for mounting Bulldog stabiliser to caravan or trailer.

Handle to operate quick release mechanism on Bulldog 200Q & 100Q Stabilisers.

Quick release handle for the Driver Stabiliser

Locking stud for the Bulldog 200Q and other car plates with 12mm thread, 1.5 pitch.

12mm locking handle for stabiliser car plate. Not suitable for early Scott which was 1/2".

This is the 10mm handle for the upgraded car plate. Please note the early models had an 8mm handle.

Please note the picture is for illustration purposes only and may not be exact part.

This is the locking handle for the Bulldog 100Q car plate original equipment. It has M12 1.5mm thread unique to Bulldog equipment.

Plastic slipper for LC5 caravan L bracket. Also suits many other stabiliser L brackets with 50mm wide spring arms. Comes with fixing screw and locking nut

Pair of 4" replacement friction discs.

Pair of 4" replacement friction discs. These have 12mm centre hole.

Pair of 4.5" discs.

Pair of 4" Friction Discs for the Corgi Stabiliser.

Pair of friction pads & 4 circlips for AKS1300 Stabiliser.

2 x friction pads & 2 x roll pins
NOTE: These pads are suitable for older type AKS 2000/2500 with solid round handles (not honeycombe type construction as on later models)

Comprises:
2 x friction pads & 2 x red plastic caps

Note: For AKS 2004/3004 these pads replace the side pads only - please see separate details for front/rear pads

1 x front pad, 1 x rear pad plus screws

1 x front pad, 1 x rear pad plus screws